An Innate Host Defense Protein ß2-Microglobulin Keeps a Check on α-Synuclein amyloid Assembly: Implications in Parkinson's Disease.

Amyloid formation due to protein misfolding has gained significant attention due to its association with neurodegenerative diseases. α-Synuclein (α-syn) is one such protein that undergoes a profound conformational switch to form higher order cross-ß-sheet structures, resulting in amyloid formation, which is linked to the pathophysiology of Parkinson's disease (PD). The present status of research on α-syn aggregation and PD reveals that the disease progression may be linked with many other diseases, such as kidney-related disorders. Unraveling the link between PD and non-neurological diseases may help in early detection and a better understanding of PD progression. Herein, we investigated the modulation of α-syn in the presence of ß2-microglobulin (ß2m), a structural protein associated with dialysis-related amyloidosis. We took a multi-disciplinary approach to establish that ß2m mitigates amyloid formation by α-syn. Our fluorescence, microscopy and toxicity data demonstrated that sub-stoichiometric ratio of ß2m drives α-syn into off-pathway non-toxic aggregates incompetent of transforming into amyloids. Using AlphaFold2 and all-atom MD simulation, we showed that the ß-strand segments (ß1 and ß2) of α-synuclein, which frequently engage in interactions within amyloid fibrils, interact with the last ß-strand at the C-terminal of ß2m. The outcome of this study will unravel the yet unknown potential linkage of PD with kidney-related disorders. Insights from the cross-talk between two amyloidogenic proteins will lead to early diagnosis and new therapeutic approaches for treating Parkinson's disease. Finally, disruption of the nucleation process of α-syn amyloids by targeting the ß1-ß2 region will constitute a potential therapeutic approach for inhibiting amyloid formation.

ProDFace: A web-tool for the dissection of protein-DNA interfaces.

Protein-DNA interactions play a crucial role in gene expression and regulation. Identifying the DNA binding surface of proteins has long been a challenge-in comparison to protein-protein interactions, limited progress has been made in the development of efficient DNA binding site prediction and protein-DNA docking methods. Here we present ProDFace, a web tool that characterizes the binding region of a protein-DNA complex based on amino acid propensity, hydrogen bond (HB) donor capacity (number of solvent accessible HB donor groups), sequence conservation at the interface core and rim region, and geometry. The program takes as input the structure of a protein-DNA complex in PDB (Protein Data Bank) format, and outputs various physicochemical and geometric parameters of the interface, as well as conservation of the interface residues in the protein component. Values are provided for the whole interface, and after dissecting it into core and rim regions. Details of water mediated HBs between protein and DNA, potential HB donor groups present at the binding surface of protein, and conserved interface residues are also provided as downloadable text files. These parameters can be useful in evaluating and validating protein-DNA docking solutions, structures derived from simulation as well as solutions from the available prediction tools, and facilitate the development of more efficient prediction methods. The web-tool is freely available at structbioinfo.iitj.ac.in/resources/bioinfo/pd_interface .

Prerecognition Diffusion Mechanism of Human DNA Mismatch Repair Proteins along DNA: Msh2-Msh3 versus Msh2-Msh6.

DNA mismatch repair (MMR) is an important postreplication process that eliminates mispaired or unpaired nucleotides to ensure genomic replication fidelity. In humans, Msh2-Msh6 and Msh2-Msh3 are the two mismatch repair initiation factors that recognize DNA lesions. While X-ray crystal structures exist for these proteins in complex with DNA lesions, little is known about their structures during the initial search along nonspecific double-stranded DNA, because they are short-lived and difficult to determine experimentally. In this study, various computational approaches were used to sidestep these difficulties. All-atom and coarse-grained simulations based on the crystal structures of Msh2-Msh3 and Msh2-Msh6 showed no translation along the DNA, suggesting that the initial search conformation differs from the lesion-bound crystal structure. We modeled probable search-mode structures of MSH proteins and showed, using coarse-grained molecular dynamics simulations, that they can perform rotation-coupled diffusion on DNA, which is a suitable and efficient search mechanism for their function and one predicted earlier by fluorescence resonance energy transfer and fluorescence microscopy studies. This search mechanism is implemented by electrostatic interactions among the mismatch-binding domain (MBD), the clamp domains, and the DNA backbone. During simulations, their diffusion rate did not change significantly with an increasing salt concentration, which is consistent with observations from experimental studies. When the gap between their DNA-binding clamps was increased, Msh2-Msh3 diffused mostly via the clamp domains while Msh2-Msh6 still diffused using the MBD, reproducing the experimentally measured lower diffusion coefficient of Msh2-Msh6. Interestingly, Msh2-Msh3 was capable of dissociating from the DNA, whereas Msh2-Msh6 always diffused on the DNA duplex. This is consistent with the experimental observation that Msh2-Msh3, unlike Msh2-Msh6, can overcome obstacles such as nucleosomes. Our models provide a molecular picture of the different mismatch search mechanisms undertaken by Msh2-Msh6 and Msh2-Msh3, despite the similarity of their structures.

Balance between asymmetry and abundance in multi-domain DNA-binding proteins may regulate the kinetics of their binding to DNA.

DNA sequences are often recognized by multi-domain proteins that may have higher affinity and specificity than single-domain proteins. However, the higher affinity to DNA might be coupled with slower recognition kinetics. In this study, we address this balance between stability and kinetics for multi-domain Cys2His2- (C2H2-) type zinc-finger (ZF) proteins. These proteins are the most prevalent DNA-binding domain in eukaryotes and C2H2 type zinc-finger proteins (C2H2-ZFPs) constitute nearly one-half of all known and predicted transcription factors in human. Extensive contact with DNA via tandem ZF domains confers high stability on the sequence-specific complexes. However, this can limit target search efficiency, especially for low abundance ZFPs. Earlier, we found that asymmetrical distribution of electrostatic charge among the three ZF domains of the low abundance transcription factor Egr-1 facilitates its DNA search process. Here, on a diverse set of 273 human C2H2-ZFP comprised of 3-15 tandem ZF domains, we find that, in many cases, electrostatic charge and binding specificity are asymmetrically distributed among the ZF domains so that neighbouring domains have different DNA-binding properties. For proteins containing 3-6 ZF domains, we show that the low abundance proteins possess a higher degree of non-specific asymmetry and vice versa. Our findings suggest that where the electrostatics of tandem ZF domains are similar (i.e., symmetrical), the ZFPs are more abundant to optimize their DNA search efficiency. This study reveals new insights into the fundamental determinants of recognition by C2H2-ZFPs of their DNA binding sites in the cellular landscape. The importance of electrostatic asymmetry with respect to binding site recognition by C2H2-ZFPs suggests the possibility that it may also be important in other ZFP systems and reveals a new design feature for zinc finger engineering.

Structure, stability and specificity of the binding of ssDNA and ssRNA with proteins.

Recognition of single-stranded DNA (ssDNA) or single-stranded RNA (ssRNA) is important for many fundamental cellular functions. A variety of single-stranded DNA-binding proteins (ssDBPs) and single-stranded RNA-binding proteins (ssRBPs) have evolved that bind ssDNA and ssRNA, respectively, with varying degree of affinities and specificities to form complexes. Structural studies of these complexes provide key insights into their recognition mechanism. However, computational modeling of the specific recognition process and to predict the structure of the complex is challenging, primarily due to the heterogeneity of their binding energy landscape and the greater flexibility of ssDNA or ssRNA compared with double-stranded nucleic acids. Consequently, considerably fewer computational studies have explored interactions between proteins and single-stranded nucleic acids compared with protein interactions with double-stranded nucleic acids. Here, we report a newly developed energy-based coarse-grained model to predict the structure of ssDNA-ssDBP and ssRNA-ssRBP complexes and to assess their sequence-specific interactions and stabilities. We tuned two factors that can modulate specific recognition: base-aromatic stacking strength and the flexibility of the single-stranded nucleic acid. The model was successfully applied to predict the binding conformations of 12 distinct ssDBP and ssRBP structures with their cognate ssDNA and ssRNA partners having various sequences. Estimated binding energies agreed well with the corresponding experimental binding affinities. Bound conformations from the simulation showed a funnel-shaped binding energy distribution where the native-like conformations corresponded to the energy minima. The various ssDNA-protein and ssRNA-protein complexes differed in the balance of electrostatic and aromatic energies. The lower affinity of the ssRNA-ssRBP complexes compared with the ssDNA-ssDBP complexes stems from lower flexibility of ssRNA compared to ssDNA, which results in higher rate constants for the dissociation of the complex (koff) for complexes involving the former.

Inhibition of NLRP3 inflammasome activation by cell-permeable stapled peptides.

Interleukin-1ß (IL-1ß) is a major cytokine that initiates and enhances inflammatory responses. Excessive IL-1ß production is a characteristic of most chronic inflammatory diseases, including atherosclerosis, type 2 diabetes, and obesity, which affect a large proportion of the global population. The production of bioactive IL-1ß is mediated by a caspase-1-activating complex known as an 'inflammasome'. The NLRP3 inflammasome has been associated with several human inflammatory and autoimmune diseases and represents a potential therapeutic target for disrupting IL-1ß production. We used molecular modeling guided by molecular dynamics simulations to design α-helical stapled peptides targeting the pyrin domain of the adaptor protein ASC to interrupt the development of its filament, which is crucial for NLRP3 inflammasome formation. The peptides were effectively internalized by human monocytic cells and efficiently suppressed the release of the inflammasome-regulated cytokines IL-1ß and IL-18, following exogenous activation of the NLRP3 inflammasome. The peptides reduced ASC speck formation and caspase-1 processing thereby suppressing pro-IL-1ß processing and release of active IL-1ß. This is the first demonstration of the successful use of stapled peptides designed to target the adaptor protein ASC, and can be extended to other inflammatory pathways to disrupt excessive IL-1ß production.

Mechanism of the formation of the RecA-ssDNA nucleoprotein filament structure: a coarse-grained approach.

In prokaryotes, the RecA protein catalyzes the repair and strand exchange of double-stranded DNA. RecA binds to single-stranded DNA (ssDNA) and forms a presynaptic complex in which the protein polymerizes around the ssDNA to form a right-handed helical nucleoprotein filament structure. In the present work, the mechanism for the formation of the RecA-ssDNA filament structure is modeled using coarse-grained molecular dynamics simulations. Information from the X-ray structure was used to model the protein itself but not its interactions; the interactions between the protein and the ssDNA were modeled solely by electrostatic, aromatic, and repulsive energies. For the present study, the monomeric, dimeric, and trimeric units of RecA and 4, 8, and 11 NT-long ssDNA, respectively, were studied. Our results indicate that monomeric RecA is not sufficient for nucleoprotein filament formation; rather, dimeric RecA is the elementary binding unit, with higher multimeric units of RecA facilitating filament formation. Our results reveal that loop region flexibility at the primary binding site of RecA is essential for it to bind the incoming ssDNA, that the aromatic residues present in the loop region play an important role in ssDNA binding, and that ATP may play a role in guiding the ssDNA by changing the electrostatic potential of the RecA protein.

The Multifaceted Roles of Molecular Dynamics Simulations in Drug Discovery.

Discovery of new therapeutics is a very challenging, expensive and time-consuming process. With the number of approved drugs declining steadily, combined with increasing costs, a rational approach is needed to facilitate, expedite and streamline the drug discovery process. In silico methods are playing key roles in the discovery of a growing number of marketed drugs. The use of computational approaches, particularly molecular dynamics, in drug design is rapidly gaining momentum and acceptance as an essential part of the toolkit for modern drug discovery. From analysing atomistic details for explaining experimentally observed phenomena, to designing drugs with increased efficacy and specificity, the insight that such simulations can provide is generating new ideas and applications that have previously been unexplored. Here we discuss physics-based simulation methodologies and applications in drug design: from locating pockets to designing novel lead compounds, from small molecules to peptides. With developments in hardware, software and theory, the improved predictive abilities of in silico efforts are becoming an essential part of efficient, economic and accurate drug development strategies.

Wetting of nonconserved residue-backbones: A feature indicative of aggregation associated regions of proteins.

Aggregation is an irreversible form of protein complexation and often toxic to cells. The process entails partial or major unfolding that is largely driven by hydration. We model the role of hydration in aggregation using "Dehydrons." "Dehydrons" are unsatisfied backbone hydrogen bonds in proteins that seek shielding from water molecules by associating with ligands or proteins. We find that the residues at aggregation interfaces have hydrated backbones, and in contrast to other forms of protein-protein interactions, are under less evolutionary pressure to be conserved. Combining evolutionary conservation of residues and extent of backbone hydration allows us to distinguish regions on proteins associated with aggregation (non-conserved dehydron-residues) from other interaction interfaces (conserved dehydron-residues). This novel feature can complement the existing strategies used to investigate protein aggregation/complexation.

Characterization and prediction of the binding site in DNA-binding proteins: improvement of accuracy by combining residue composition, evolutionary conservation and structural parameters.

We present a set of four parameters that in combination can predict DNA-binding residues on protein structures to a high degree of accuracy. These are the number of evolutionary conserved residues (N(cons)) and their spatial clustering (ρ(e)), hydrogen bond donor capability (D(p)) and residue propensity (R(p)). We first used these parameters to characterize 130 interfaces in a set of 126 DNA-binding proteins (DBPs). The applicability of these parameters both individually and in combination, to distinguish the true binding region from the rest of the protein surface was then analyzed. R(p) shows the best performance identifying the true interface with the top rank in 83% cases. Importantly, we also used the unbound-bound test cases of the protein-DNA docking benchmark to test the efficacy of our method. When applied to the unbound form of the DBPs, R(p) can distinguish 86% cases. Finally, we have applied the SVM approach for recognizing the interface region using the above parameters along with the individual amino acid composition as attributes. The accuracy of prediction is 90.5% for the bound structures and 93.6% for the unbound form of the proteins.

PRICE (PRotein Interface Conservation and Energetics): a server for the analysis of protein-protein interfaces.

Residues in a protein-protein interface that are important for forming and stabilizing the interaction can usually be identified by looking at patterns of evolutionary conservation in groups of homologous proteins and also by the computational identification of binding hotspots. The PRICE (PRotein Interface Conservation and Energetics) server takes the coordinates of a protein-protein complex, dissects the interface into core and rim regions, and calculates (1) the degree of conservation (measured as the sequence entropy), as well as (2) the change in free energy of binding (∆∆G, due to alanine scanning mutagenesis) of interface residues. Results are displayed as color-coded plots and also made available for download. This enables the computational identification of binding hot spots, based on which further experiments can be designed. The method will aid in protein functional prediction by correct assignment of hot regions involved in binding. Consideration of sequence entropies for residues with large ∆∆G values may provide an indication of the biological relevance of the interface. Finally, the results obtained on a test set of alanine mutants has been compared to those obtained using other servers/methods. The PRICE server is a web application available at http://www.boseinst.ernet.in/resources/bioinfo/stag.html.

The subunit interfaces of weakly associated homodimeric proteins.

We analyzed subunit interfaces in 315 homodimers with an X-ray structure in the Protein Data Bank, validated by checking the literature for data that indicate that the proteins are dimeric in solution and that, in the case of the "weak" dimers, the homodimer is in equilibrium with the monomer. The interfaces of the 42 weak dimers, which are smaller by a factor of 2.4 on average than in the remainder of the set, are comparable in size with antibody-antigen or protease-inhibitor interfaces. Nevertheless, they are more hydrophobic than in the average transient protein-protein complex and similar in amino acid composition to the other homodimer interfaces. The mean numbers of interface hydrogen bonds and hydration water molecules per unit area are also similar in homodimers and transient complexes. Parameters related to the atomic packing suggest that many of the weak dimer interfaces are loosely packed, and we suggest that this contributes to their low stability. To evaluate the evolutionary selection pressure on interface residues, we calculated the Shannon entropy of homologous amino acid sequences at 60% sequence identity. In 93% of the homodimers, the interface residues are better conserved than the residues on the protein surface. The weak dimers display the same high degree of interface conservation as other homodimers, but their homologs may be heterodimers as well as homodimers. Their interfaces may be good models in terms of their size, composition, and evolutionary conservation for the labile subunit contacts that allow protein assemblies to share and exchange components, allosteric proteins to undergo quaternary structure transitions, and molecular machines to operate in the cell.

Accessibility and partner number of protein residues, their relationship and a webserver, ContPlot for their display.

BACKGROUND: Depending on chemical features residues have preferred locations -- interior or exterior -- in protein structures, which also determine how many other residues are found around them. The close packing of residues is the hallmark of protein interior and protein-protein interaction sites. RESULTS: The average values of accessible surface area (ASA) and partner number (PN, the number of other residues within a distance of 4.5 A from any atom of a given residue) of different residues have been determined and a webserver, ContPlot has been designed to display these values (relative to the average values) along the protein sequence. This would be useful to visually identify residues that are densely packed, or those involved in protein-protein interactions. The skewness observed in the distribution of PNs is indicative of the hydrophobic or hydrophilic nature of the residue. The variation of ASA with PN can be analytically expressed in terms of a cubic equation. These equations (one for each residue) can be used to estimate the ASA of a polypeptide chain using the PNs of the individual residues in the structure. CONCLUSION: The atom-based PNs (obtained by counting surrounding atoms) are highly correlated to the residue-based PN, indicating that the latter can adequately capture the atomic details of packing. The average values of ASA and PN associated with each residue should be useful in protein structure prediction or fold-recognition algorithm. ContPlot would provide a handy tool to assess the importance of a residue in the protein structure or interaction site.

Peptide segments in protein-protein interfaces.

An important component of functional genomics involves the understanding of protein association. The interfaces resulting from protein-protein interactions - (i) specific, as represented by the homodimeric quaternary structures and the complexes formed by two independently occurring protein components, and (ii) non-specific, as observed in the crystal lattice of monomeric proteins - have been analysed on the basis of the length and the number of peptide segments. In 1000 A2 of the interface area, contributed by a polypeptide chain, there would be 3.4 segments in homodimers, 5.6 in complexes and 6.3 in crystal contacts. Concomitantly, the segments are the longest (with 8.7 interface residues) in homodimers. Core segments (likely to contribute more towards binding) are more in number in homodimers (1.7) than in crystal contacts (0.5), and this number can be used as one of the parameters to distinguish between the two types of interfaces. Dominant segments involved in specific interactions, along with their secondary structural features, are enumerated.

ProFace: a server for the analysis of the physicochemical features of protein-protein interfaces.

BACKGROUND: Molecular recognition is all pervasive in biology. Protein molecules are involved in enzyme regulation, immune response, signal transduction, oligomer assembly, etc. Delineation of physical and chemical features of the interface formed by protein-protein association would allow us to better understand protein interaction networks on one hand, and to design molecules that can engage a given interface and thereby control protein function on the other hand. RESULTS: ProFace is a suite of programs that uses a file, containing atomic coordinates of a multi-chain molecule, as input and analyzes the interface between any two or more subunits. The interface residues are shown segregated into spatial patches (if such a clustering is possible based on an input threshold distance) and/or core and rim regions. A number of physicochemical parameters defining the interface is tabulated. Among the different output files, one contains the list of interacting residues across the interface. Results can be used to infer if a particular interface belongs to a homodimeric molecule. CONCLUSION: A web-server, ProFace (available at http://www.boseinst.ernet.in/resources/bioinfo/stag.html) has been developed for dissecting protein-protein interfaces and deriving various physicochemical parameters.